This model is sold out, order instead: Ferport TAC 2 KR . The Ferport TAC 4 KR is a 2-channel dark gray remote control with 10 DIP switches and a frequency of 433.92MHz. Easy to set by setting the DIP switches to match your...

This model was replaced by a new model: Ditec ZEN2C . We also have an alternative for this model: VS-005-MULTI . The Ditec GOL4C is a dark gray remote control with black housing and 4 gray keys with red LED protection on top. Please...

Marantec Control 950 signal light with wall bracket, 12V-24V DC version, for signal indication before or during movement of the gate/door. Depending on the programming, the Control 950 can flash or burn continuously, the lamp can be rotated 180 degrees. Attention! The flashing function...

The Mhouse MT4 MOOVO is a 4-channel remote control. This version has a green housing with 4 gray buttons. The Mhouse MT4 MOOVO has a frequency of 433.92 MHz with a rolling code coding. We have an alternative for this model: VS-005-MULTI . Specifications...

This model was replaced by another model: Instead, order Novotron 502 MAX 43-2 or VS-NO4 . The Novoferm TX 43-2 is a 2-channel remote control with a black housing and grey keys and is easy to set up using our own supplied manual. Note...

The V2 Phoenix4-433 is a 2-channel remote control with a frequency of 433.92 MHz, gray back and black front. This is an old model, order the new model: V2 Phox2-433 . We also have a cost-effective alternative for the V2 remote controls: VS-001-V2 ....

The Came TOPD4REN remote control with black housing and 4 buttons. This transmitter has a rolling code with dual frequency 433.92 and 868.35 MHz. This model is suitable/interchangeable with the following models: TOPD2RGS, TOPD2RBS, TOPD2RKS, TOPD2RYS, TOPD2RES, TOPD2RPS TOPD4RGS, TOPD4RBS, TOPD4RKS, TOPD4RYS, TOPD4RES, TOPD4RPS...

The Nice Era W1 is a modern 1-channel wall transmitter for operating a garage door or roller shutter. The wall transmitter is suitable for all Nice motors and receivers from the Era series, as well as tubular motors from the Era Mat and Era...

This set consists of the Liftmaster 860EV receiver and 4 hand transmitters. The Liftmaster 860EV receiver is a 3-channel receiver for Liftmaster and Chamberlain Evolution / Evo series. The following controls are suitable for this receiver: TX2EV / TX2EVS / TX2EV / TX4EV /...

Attention: This SZ-13 SL rail can only be picked up! The Marantec SZ-13 SL Timing Belt Rail is suitable for Marantec engines Comfort 220, 257.2, 260, 260 battery, 270, 280, 360, 370 and 380. This is a micro-profiled drive rail with 0.8 mm profile...

The Marantec Digital 921 868 MHz bi-linked is a 1-channel plug-in receiver / module receiver with a frequency of 868.3 MHz bi-linked coding. The receiver is suitable for Marantec motors D200 and D300 series. Easy to connect via plug-in system, easy programming with 200...

The Came TOPD4FRN remote control with black housing and 4 buttons. This remote control has a fixed code with dual frequency 433.92 and 868.35 MHz. This model is suitable/interchangeable with the following models: TOP862EE, TOP864EE, TOP862EV, TOP864EV, TOP862NA, TOP864NA, TOPD2F, TOPD4F Specifications Brand Came...

Meet the new compact 2-channel remote control from Gibidi: Vinci. The handheld transmitter is small, lightweight and designed for convenience and reliability. Compact and Pocket-Friendly At just 40mm wide, 12mm thick and weighing 12g, Vinci fits easily in your pocket. Its clever design also...

The VS-XT4-868-SLH (white) for Faac is an alternative remote control with white housing, 4 buttons and a frequency of 868.92 MHz. The remote control is compatible with all Faac and MAC 868 MHz SLH transmitters including the XT2 868 SLH, DL 868 SLH, TML...

The T-wall is a 1-channel wireless push button with a frequency of 433 MHz, suitable for all motors via the supplied external VS-401-433 receiver. Supplied with mounting hardware. Specifications Brand Seip Type T-wall wireless push button Battery CR2032 Frequency 433 MHz Channels 1 Coding...

The Nice K4M is a remote control with a black housing, 4 yellow keys and DIP switches. This model is no longer in production, we supply another model instead which is functionally identical. Available in frequencies 26.995 MHz, 27.120 MHz, 30.875 MHz or 30.900...

The Cody Touch is an illuminated modern anti-vandal wired surface-mounted code keypad in a black scratch-resistant metal frame with 12 keys and integrated blue lighting. The code panel is suitable for Cody Light decoders from Geba and is easy to connect via the 5...

The Marantec Command 132 868 MHz is a mini flush-mounted transmitter with 4 channels, equipped with a battery, for the connection of external push buttons/switches. The transmitter has an IMPULSE function for up to four channels (or ON/OFF for two channels), and can be...

The Tousek BT40-4B is a black/gray handheld transmitter with 4 buttons. The remote control has dip switches and a frequency of 40.685 MHz. Attention! This is the dipswitch model, not to be confused with the similar model without dipswitches, this one has a different...

The Telecody+ is a wireless code keypad with illuminated keys and a frequency of 868.8 MHz FM, suitable for L-Door installations with Sommer motor. The code panel is screwed into a vandal-resistant aluminum bracket that can be easily attached to the wall and cannot...

The Life FIDO2 is a remote control with a black housing, 4 dark gray buttons and a frequency of 433.92 MHz. This is an old model and was replaced by the Life MAXI 4 . We also offer an alternative for this remote control:...

The Novoferm Novotron 512 MIX 43-2 is a 2-button remote control with a frequency of 433.92 MHz and an average range of approx. 100 metres in open field. This remote control was replaced by a new model: Novotron 502 MAX 43-02 . For this...

Make your old motor compatible with Marantec remote controls. The Marantec Digital 371 868 MHz conversion kit is an intermediate plug housing that allows your current garage door/garage door operator to work with Marantec remote controls on 868.3 MHz. This conversion kit from Marantec...

The Marantec Digital 992 receiver is a 2-channel receiver on 868 MHz bi-linked with a protection degree of IP65. The receiver has 2 channels for free assignment, pulse on/off for each channel and a connection for external button for direct switching of each relay....

For this model we offer 2 alternatives: EA433 2KM mini (small 2-channel model). VS-CN4 (small 4-channel model with key cover). The RCU 433-4 for Crawford-Normstahl is a 4-channel remote control with a frequency of 433.92 MHz with black color and gray keys. This remote...

The V2 Flexy 2 is an analogue control unit for swing gates, equipped with a built-in 433.92 MHz receiver. Some possibilities at a glance: Adjustment and programming via trimmer and dip switch. 230V power supply for 2 single-phase motors. Built-in V2 433.92 MHz receiver....

This glass fuse holder can be used to protect electrical circuits from excessive current. Easy to connect when installing an extra receiver as extra security. Supplied with a 100mA glass fuse. The holder is suitable for glass fuses of 5x20mm max. 5 ampere, has...

The Memo expansion module for Sommer is a plug-in module that can expand the memory of your Base+/Pro+/Tiga+ motor. With this module you can program up to 450 additional memory locations and easily copy already programmed transmitters to the new motor. This module is...

The Marantec Digital 993 868 MHz conversion kit is an intermediate plug housing that allows your current garage door operator to work with the white bi-linked remote controls from Marantec. This conversion kit from Marantec is compatible with virtually any motor and must be...

The BFT Mitto 4 is an oval, dark gray remote control with 4 buttons and a frequency of 433.92 MHz rolling code. This model is still available, but there is also a new model available: Check out the Mitto COOL C4 . Looking for...

We also have a cheap alternative for this model: View the VS-SOM4-868 with included key strap The Sommer Slider Vibe TRX40-868-4 is a 4-channel remote control with a sliding housing made of stainless steel and plastic and SOMloq2 coding (Benelux). The remote control is...

The D313-868 is a 3-channel remote control with a light gray front and dark gray back for L-Door installations with a Marantec motor. This remote control operates on a frequency of 868.3 MHz Multi-Bit and is supplied with a coding plug. This is an...

The Seip RC-AM-433 is a 4-channel remote control with a frequency of 433.92 MHz AM. This model is no longer in production, so please order the VS-012-AM remote control instead. Please note, check the back of your remote control: This model also exists with...

The Crawford 4004 TX03-40-5 is a remote control with a frequency of 40.685 MHz, a dark gray housing and 5 red buttons. This model is no longer produced and was replaced by the much smaller Sommer 4050 TX02-40-2 mini . Also suitable for older...

The GTI2-868 for DEA is a 2-channel remote control with white color and blue keys and a frequency of 868 MHz and support for 3 codings: HCS Rolling-Code, Dip-Switch, DART The remote control can be programmed directly to the receiver. Compatible with the following...

The VS-DIGITAL-MINI-868 for Marantec is a gray, alternative Multi-Bit mini remote control with 2 buttons and a frequency of 868.3 MHz. For programming you need an original grey Marantec 868.3 MHz remote control, you cannot teach this directly to the motor or receiver. Programming...

The Sommer SOMcom2.1 is a bidirectional receiver with a frequency of 868MHz (SOMloq2) featuring 2 channels and 40 memory slots. The memory is expandable up to 450 via the optional Memo memory module. The receiver is compatible with SOMlink and can operate in both...

The Teleco TVTXK868A04 is an illuminated wireless keypad with a black housing, 12 gray keys, 4 channels and a frequency of 868 MHz. The code panel is suitable for Teleco receivers on 868 MHz, has an IP54 protection degree and has a range of...

View our alternative set: Universal Photocells 180 degrees rotatable DIR is the synchronized infrared photocell with a range of 10, 20 or 30 m. Simple surface-mounting or flush-mounting. A double height bollard is also available for installations in areas with heavy vehicle traffic. Specifications...

Universele USB-adapter voor het opladen/voeden van verschillende apparaten, voor gebruik in Nederlandse stopcontacten. Met een output van 5V en 1000mA biedt deze adapter betrouwbare en stabiele prestaties, perfect voor smartphones, tablets, en andere USB-apparaten. Je krijgt 4 stuks geleverd. Specificaties Type USB-adapter Voltage 100-240v-50/60Hz...

De Erone SETR2641AM2B is een 2-kanaals afstandsbediening met een egale lichtgrijze behuizing, 2 blauwe knoppen en een frequentie van 433.92 MHz. Deze handzender moet je programmeren in de buurt van de ontvanger. De SETR2641AM2B/4B is bestemd voor het bedienen van automatische sluitsystemen en anti-inbraaksystemen...

Compacte stabiele voeding voor aansluiting van ontvangers en codeklavieren in situaties waar geen stopcontact is voorzien. Specificaties Beschermingsgraad IP20 Type Voeding voor Ontvangers en Codeklavieren Input Voltage 220-240V AC ~ 50/60Hz. Output Voltage 12 V DC (DC) with 2.5 A. Powre 30 Watt /...

De Cardin S504 TXQ504C4 is een 4-kanaals afstandsbediening met een donkergrijze behuizing en 4 grijze toetsen en een frequentie van 433.92 MHz FM. De handzender is voorzien van 128-bit encryptie en een dynamische rolling code. Dit model is geschikt voor de Cardin S series waaronder...

De Genie MNHS433-04 is een afstandsbediening met donkergrijze behuizing, 4 blauwe toetsen en een frequentie van 433.92 MHz. Dit model werd vervangen door een nieuwer model: Novotron 502 MAX 43-2. Hiervoor hebben wij ook een compact model met toetsafdekking: VS-GENIE-4. Specificaties Merk Genie Type MNHS433-04 Frequentie...

De Genie MNHS433-02 is een afstandsbediening met donkergrijze behuizing, 2 blauwe toetsen en een frequentie van 433.92 MHz. Dit model werd vervangen door een nieuwer model: Novotron 502 MAX 43-2. Hiervoor hebben wij ook een compact model met toetsafdekking: VS-GENIE-4. Specificaties Merk Genie Type MNHS433-02 Frequentie...

V2 EASY2 control for 1 single-phase motor up to 700W with connector for MR plug-in receiver. Programming via DIP & potentiometers and LED indication. Some possibilities at a glance: 230V power supply for 1 single-phase motor. Plug-in adapter for modular radio receiver MR2. Up,...

The AXK4P is a wireless, illuminated 4-channel code keypad for Entrematic and Ditec, with a black casing, 12 keys, and a frequency of 868.35 MHz. It supports fixed code, rolling code, AES-128bit Encrypted, and PROTECTED Mode.The keypad offers two power options: a 9 V...

This antenna with a 10m cable for Sommer allows you to extend the range of your remote control/receiver, enabling you to open and close your gate from a greater distance. The antenna features a 50 Ohm coaxial cable with a length of 10 meters...

The Came TOP 432M is a 2-channel remote control with black housing and 2 pink buttons and a frequency of 433.92 Mhz. This model is no longer in production and was replaced by TOP-432EE . Or order the model with key cover: View the...

The C409 from Ferport is a 2-channel receiver, suitable for Ferport products. The receiver has a memory for 60 user codes and is suitable for Ferport keypads, readers and electronic keys. This receiver is compatible with: the electronic keys of the FERPORT DDK type...